Energy storage inverter-single phase 5KW

Advantage

Installation precautions

1. The installation method and position must be suitable for the weight and size of the inverter;

2. The inverter must be installed on a solid wall such as a brick wall or a concrete wall to avoid noise or falling when the inverter is running;

3. The installation site should be clearly visible and can be safely accessed without the use of scaffolding and other auxiliary means;

4. In order to facilitate the installation and operation, the installation height of the inverter should be flush with the eye height;

5. The highest altitude of the installation site shall not exceed 2000m, otherwise the inverter may reduce power operation;

6. To ensure that the inverter runs well, the ambient temperature of the installation site should be between -25 ° C ~ +60 ° C;

7. Do not install the inverter in direct sunlight, so as not to cause the temperature is too high, resulting in inverter power down operation;

8. There should be shielding above the inverter;

9. Sufficient effective space should be left around the inverter for good heat dissipation;

10. Vertical installation, wiring area must be down, not allowed to install horizontally; The tilt angle shall not exceed 30 degrees when installed backward; Tilted forward, horizontal and inverted installation is not allowed.

Product parameters